SOAP FEED PUMP
	Range
	a) Capacity upto 4 Tons/Hr.

Salient Features

External lubrication arrangement. Liquid to be pumped does not contaminate the bearings. Perfect Alignment of the pump is maintained Starting torque load is shared by bearing.

Working Principle

Soap Feed Pump are similar in pumping action to internal gear pumps in that two gears come into and out of mesh to produce flow. However, the external gear pump uses two identical gears rotating against each other - one gear is driven by a motor and it in turn drives the other gear. Each gear is supported by a shaft with bearings on both sides of the gear. 1.As the gears come out of mesh, they create expanding volume on the inlet side of the pump. Liquid flows into the cavity and is trapped by the gear teeth as they rotate. 2. Liquid travels around the interior of the casing in the pockets between the teeth and the casing - it does not pass between the gears. 3. Finally, the meshing of the gears forces liquid through the outlet port under pressure. Because the gears are supported on both sides, external gear pumps are quiet- running and are routinely used for high-pressure applications. With no overhung bearing loads, the rotor shaft can't deflect and cause premature wear.

Application

Soap & Detergent