GEARED MOTORS
	Geared Motors are built as one unit to give compactness and strength to give most of mechanical power transmission requirements. It is designed for continuous duty under arduous operating conditions. The method of manufacturing ensures a high durability factor, maximum strength and low noise level.
Gear Case
The gear case is made of high quality closed grain cast iron. The case is accurately machined so as to be fully oil tight and dust proof.
Gears And Pinions
Gears and pinions are of helical type made from special alloy steels hardened and ground to give a high degree of accuracy to ensure a smooth running with maximum efficiency. The gear ratios are so designed to provide a wide range of speed reductions.
Shafts And Bearings
Output shafts are made out of high quality medium carbon steel accurately ground to close limits. Bearings are adequately selected to ensure longer life, smooth operation and to withstand high overhung loads.
Lubrication
The gear units have a splash lubrication arrangement. Thus no special care is required except occasional topping up of the oil to required level. The gear unit is provided with an oil level indicator, drain plug and a breather plug.
Electrical
Geared Motors are fitted with TEFC squirrel cage induction motors suitable for 415 volts, 3 phase, 50 Hz AC supply as per IS 325 with class B insulation. Any other voltage can be catered to on request.
Testing
All components undergo strict quality control checks at various stages of production. The assembled units are finally tested for noise, oil level and temperature rise.