COOLING
	Modular Construction
	National Cooling Towers are of vertical induced draft counter flow design. The tower ideal with regard space economy and cooling efficiency.
	F.R.P. Body
	The Body of the tower made of tough fibre glass reinforced plastic. It has sufficient structural strength to withstand high industrial vibrations and wind velocity, It is resistant to local impacts and even if damage is sustained local repairs can easily be done.
Special Motors (IP 55)
Continuous rating shock-proof totally enclosed type as per IP-55 and suitable for out door mounting.
Fan
The fan is directly driven and of axial flow types. The fan blades are of cast aluminum completely free from problem encountered with belt and gear drives.
Drift Eliminator
It prevents spray entrainment reduces carryover losses of water. The eliminator is of rigid P.V.C.
P.V.C. FILL
Corrosion resistant fill are of polyvinyl chloride in honey comb design.
Fixed Sprinkler With Spray Nozzles
Fixed sprinkler with spray nozzles for uniform distribution of water over the fill area. Nozzles are easily removable for cleaning through the inspection window.
Inspection Window
Easy operating window is provided to inspect from where water distribution and fill can be observed clearly. Any repairing can be done through the window.
Most Economical
Smaller H.P. motors are used for the towers to make a great deal of difference in operating cost. Aiming to deliver quality product at most economical price.
Maintenance
Considerably reduced because fan is the only moving part of the cooling tower. Fixed distribution system instead of rotating sprinkler which eliminates all bearings and frictional problems.